THE PACKMAN

In conversation with Sachit and Tarun Katyal of Anupama Printing Solutions

Sachit and Tarun Katyal of Anupama Printing Solutions

Anupama Printing Solutions is among the largest prepress service providers across two sites in North India. Sachit Katyal, chief operating officer; and Tarun Katyal, director of Anupama Printing Solutions get candid about their business during an interview and share interesting insights about the flexo industry. The Katyals also speak about the contribution of Miraclon’s Kodak Flexcel NX solutions to the success of their business. Here is an excerpt from the interview.

The company is also participating in Labelexpo India 2022, Stand N17.

Describe the journey of Anupama Printing Solutions.

Sachit Katyal: Our business was into the trading of consumables for the offset printing industry. In 2008 we visited drupa with a plan to grow the business and made the investment in a Basys CtCP imaging device. We later added more imaging equipment, including a Kodak imager in 2012.

After growing the offset trade shop business and building up a steady base of clients, we were planning to diversify around 2014 when we discussed with the then-Kodak team the possibilities in flexo, who played a consultative role in helping us understand the capabilities of Flexcel NX technology.

Our initial interest in Flexcel NX technology was brought up by a need to cater to customers that required DITR film for certain print applications. When we installed the Flexcel NX Mid system in 2015, we got a really good response and support from these DITR customers as well as flexo converters that we supplied Flexcel NX plates to. As our newly diversified business grew, we added more capacity with an investment in the Flexcel NX 4260 system. Both these systems are at our Delhi-NCR unit.

Our third Flexcel NX, a mid-size configuration, is now running at our Baddi unit to provide quick support to our local customers in that region. All three Flexcel NX systems are hybrid in nature, capable of imaging for flexo as well as offset. We have 60 employees across our both sites.

What prompted the expansion of your service to wide web flexible packaging players?

Tarun Katyal: Our primary customer base was narrow and mid-web customers. However, as the business expanded, we developed expertise to also supply to wide web flexo converters. This allowed for better optimization of resources and grow our market.

What would you say are the keys to the growth of your business?

Sachit Katyal: Our ability to respond to market demands and provide quality service. Our investments into wider imaging device sizes and opening up a new location at Baddi are examples of how our business has responded to market demands and customer needs.

How important is it to build contingencies in business?

Tarun Katyal: During a very dynamic period at the beginning of the pandemic, we were able to navigate through multiple challenges. Having backup equipment to keep production on track, having a determined and involved internal team that went above and beyond to deliver on customer promises, and having supportive customers who collaborated closely to maneuver through issues.

Even now, we run multiple shifts to deliver on customer promises and to ensure that we always meet or beat expectations. Speed of turnaround is one of the most critical pieces in this line of business. Having multiple hybrid imaging devices also allows us to further enhance our capabilities to take on probable contingencies that may arise.

What services and products do you offer?

Sachit Katyal: In the offset space, we are a plate bureau that can supply thermal CtP as well as CtCP plates. In flexo, we can supply digital flexo technology like Kodak Flexcel NX plates from Miraclon, analog flexo, LAMS as well as letterpress plates and film.

What investments in software have you made over time?

Tarun Katyal: With a growing business, we invested in the Esko automation engine + Artpro+ in 2020, which helped us improve our efficiencies in pre-press significantly. The combined automation option also helps us reduce manual error to a large extent.

Which businesses would form your customer base?

Sachit Katyal: We cater to label converters, corrugation, lamitubes, offset printing, line jobs, paper cups, wide web flexibles. There is significant growth in labels and lamitubes, especially in the pharma and cosmetics space. This is due to an organic growth run, increased consumption and the opening up of new markets, and the influx of new brands into these segments.

How is your business reacting to changing industry trends?

Tarun Katyal: Our focus is on the consistent improvement of prepress to stay ahead of the curve. There is a higher collaboration between us and our customers to identify the best approach towards achieving excellent shelf impact, which means we need to work closely during the prepress stage and chalk out innovative methods to push the bar. This allows both, us and our customers, to differentiate ourselves and also bring about value addition to the packaging.

It’s equally important to understand printing equipment capabilities, which helps us in optimizing prepress for the job, which may otherwise lead to complications if not taken care of. Another element of consultative relationship-building we bring to the equation is checking in with our customers on the performance of our plates from time to time, which brings in more confidence on our support capabilities.

We have received samples of offset jobs which we are expected to match to flexo. While these instances are rare, we have had to develop our team to even cater to such tricky jobs.

How do Miraclon’s Kodak Flexcel NX solutions contribute to your success?

Sachit Katyal: Reliability and efficiency are a given with Flexcel NX plates. The finest dots that enable excellent ink transfer. Quality and dot reproduction is the biggest differentiator in the narrow web segment. Difficult to prove efficiencies around ink savings or run length owing to extremely short print runs in narrow web.

The expanded tonal range that can be reproduced with Flexcel NX plates has aided in transitioning offset jobs to flexo. On a single NX plate, we can use Standard as well as Digicap NX. That helps in improved utilization and customization, so we can gang up jobs that suit different converter sites.

From a prepress point of view, it’s the simplest setup to work with. Because we can get the best results on press with the least amount of effort in prepress.

You recently expanded into Baddi. Your thoughts on Baddi as a labels and packaging hub?

Tarun Katyal: A lot of pharma companies are expanding operations, while new ones are setting up shop, owing to conducive government policy. This has a direct bearing on the growth of label and packaging print for the pharma segment.

You have labels and narrow web, corrugation, lamitubes, as well as other specialized print service providers in the Baddi belt, to support the pharma industry, as well as other consumer and industrial goods that are produced in the region.

What is that one thing you think the local flexo industry needs?

Sachit Katyal: All converters would place blame for any print defect on the flexo plate before analyzing whether the press setup or any other consumable is at fault. So we have to be immediately involved even in resolution and play a guiding role. We have been able to do so with expertise gained over time, part credit of which does go to the Miraclon team for their support.

There is a need for a demo facility where trade shops as well as converters can get a deeper understanding of the fundamentals of platemaking and printing. This will help the industry progress. You can have the best and latest technology, but unless the people know how to implement it right and get the most out of it, it’s not helping much. A lot of second-hand information floating around, which is dangerous and causes frequent issues. Remote support is an option, but the effectiveness of remote support relies on a technically sound operator on the other side.

What are your thoughts on Miraclon as a supplier?

Tarun Katyal: The technical applications team at Miraclon has always been extremely engaged and supportive, whether it was the resolution of prepress or on-press queries, or in upskilling our team on flexo prepress and application knowledge.

What are your future plans?

Sachit Katyal: Our focus is on technical support and marketing of our expertise, to provide even better service to the flexo industry. Our strength in prepress continues to support our value proposition.

Exit mobile version